9/32” (7.32 mm) MONOCONDUCTOR 1N29 – EHS

9/32” (7.32 mm) MONOCONDUCTOR 1N29 – EHS PROPERTIES

Cable Diameter	0.288” +0.005” - 0.002”	(7.32mm + 0.13mm -0.05mm)
Minimum Sheave Diameter	16”	(41 cm)
Cable Stretch Coeffcient	1.55 ft/Kft/Klbs	(1.74 m/Km/5KN)

9/32” (7.32 mm) MONOCONDUCTOR 1N29 – EHS ELECTRICAL

Maximum Conductor Voltage	1,500 VDC
Conductor AWG Rating	15
Minimum Insulation Resistance	1,500 Mega Ω/Kft @ 500VDC	(457 Mega Ω/Km @ 500VDC)
Armor Electrical Resistance	2.8 Ω/Kft	(9.2 Ω/Km)

9/32” (7.32 mm) MONOCONDUCTOR 1N29 – EHS MECHANICAL

Cable Breaking Strength Ends Fixed	10,200 lbs	(45.4 KN) Nominal
Maximum Suggested Working Tension	5,100 lbs	(22.7 KN)
Number and Size of Wires
Inner Armor	12 x 0.0400”	(1.016 mm)
Outer Armor	18 x 0.0400”	(1.016 mm)
Average Wire Breaking Strength
Inner Armor	393 lbs	(1.75 KN)
Outer Armor	393 lbs	(1.75 KN)

Cable Type	Core Description							Cable Weight
	Temp Rating °F °C	Plastic Type	Insulation Thickness in mm	Copper Construction in mm	Res Typical Ω/Kft Ω/Km	Cap. Typical pf/ft pf/m	O.D. Each in mm	in Air	in H2 O
								lbs/Kft Kg/Km
1N29PP-EHS	300 149	Poly	0.0325 0.826	19.0x0.0142 19.0x0.361	2.8 9.2	56 184	0.136 3.454	152 226	125 187
1N29PTZ-EHS	500 260	FEP ETFE	0.0135 0.343 0.019 0.483	19x0.0142 19x0.361	2.8 9.2	55 177	0.098 2.489 0.136 3.454	157 234	130 193
1N29PA-EHS	500 260	PFA	0.0325 0.826	19x0.0142 19x0.361	2.8 9.2	51 167	0.136 3.454	159 237	131 196

The armor wires are Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for protection
during shipping and storing. Wires are preformed.
Core assembly – Copper strand consists of a total of nineteen wires. Conductor resistance is measured at 68° F.
Voids in the copper strand are flled with a water-blocking agent to reduce water and gas migration.
SUPERSEAL, a special pressure seal agent, is applied between armor layers.
The temperature rating assumes a normal gradient for both temperature and weight.
All values shown are nominal or typical values