Type P Single Conductor Flexible Armored （Unarmored） Power Cable

Type P Single Conductor Power Cable Description

0.6/1kv Or 2kv Flexible Single Conductor
Marine/Offshore Power Cable
110°C Temperature Rating
Oil, Abrasion, Moisture, Petrochemical And Sunlight Resistant
ABS, DNV Approved
ETL, UL, CSA Listed

Type P Single Conductor Power Cable Features

High strand count conductors make this product much more flexible, easier to install and more resistant to vibration than Type MC, IEC spec or commercial cables.
Lower dielectric constant and higher insulation resistance reduces electrical losses.
Excellent resistance to moisture produces stable electrical properties throughout the life of the cable.
In a fire condition, nonchlorinated flame retardant system produces less toxic and less corrosive gases.
Flame retardant: IEC 332-3 Category A
Optional braid armor of bronze or tinned copper
Severe cold durability: exceeds CSA cold bend/cold impact(-40˚C/-35˚C).
Suitable for use in Class I, Division 1 and Zone 1 environments (armored and sheathed).
Optional braid armor of bronze or tinned copper.

600v Type P Single Conductor Power Cable Specification:

Size AWG/kcmil	Unarmored Diameter (inches)	Weight (lbs/MFt.)	Inductive Reactance (Ohms/k ft.)	Voltage Drop at 110°C (Volts/Amp/kft.)	DC Resistance at 25°C (Volts/Amp/kft.)	AC Resistance at 110°C, 60 Hz (Ohms/k ft.)
18	0.115	11	0.046	13.56	7.21	9.763
16	0.125	14	0.044	8.516	4.52	6.121
14	0.164	20	0.041	5.383	2.85	3.859
12	0.187	28	0.038	3.394	1.79	2.424
10	0.208	41	0.036	2.155	1.13	1.53
8	0.26	63	0.036	1.338	0.694	0.94
6	0.29	104	0.034	0.852	0.436	0.59
4	0.39	169	0.03	0.583	0.286	0.399
2	0.45	247	0.029	0.368	0.175	0.244
1	0.505	329	0.029	0.301	0.14	0.195
1/0	0.554	412	0.029	0.246	0.111	0.156
2/0	0.609	524	0.028	0.202	0.089	0.125
3/0	0.659	631	0.028	0.167	0.07	0.1

2000v Type P Single Conductor Power Cable Specification:

		Unarmored		Armored (B)		Armored and Sheath (BS)
Size AWG/kcmil	mm2	Nominal Diameter (inches)	Weight (lbs/ MFt.)	Nominal Diameter (inches)	Weight (lbs/ MFt.)	Nominal Diameter (inches)	Weight (lbs/ MFt.)	Inductive Reactance (Ohms/ 1000 ft.)	Voltage Drop 110°C	DC	AC	Ampacity
												Free Air 110°C	110°C	100°C
18	1	0.232*	32	0.188	60	0.322	88	0.065	13.58	7.21	9.763	30	17	16
16	1.3	0.248*	34	0.2	68	0.335	98	0.062	8.535	4.52	6.121	35	25	23
14	2.1	0.259*	44	0.215	79	0.349	111	0.057	5.401	2.85	3.859	41	40	37
12	3.3	0.281*	53	0.237	95	0.372	129	0.053	3.41	1.79	2.424	64	48	45
10	5.2	0.302*	68	0.258	116	0.393	153	0.05	2.17	1.13	1.53	85	62	58
8	7.6	0.354*	96	0.31	157	0.476	212	0.048	1.351	0.694	0.94	112	77	72
6	12.5	0.384*	130	0.346	202	0.482	249	0.045	0.864	0.436	0.59	148	103	96
4	21	0.484*	210	0.44	234	0.606	307	0.039	0.593	0.286	0.399	196	137	128
2	34	0.576*	314	0.501	327	0.667	409	0.037	0.376	0.175	0.244	259	181	169
1	43	0.629*	393	0.555	409	0.721	498	0.036	0.307	0.14	0.195	298	208	194
1/0	54	0.687*	485	0.604	486	0.77	582	0.035	0.253	0.111	0.156	344	243	227
2/0	70	0.737*	596	0.659	597	0.825	700	0.034	0.208	0.089	0.125	396	281	262
3/0	86	0.788*	709	0.71	711	0.918	853		0.174	0.07	0.1	457	321	300
4/0	109	0.812	836	0.867	1087	1.04	1119	0.033	0.145	0.056	0.08	528	376	351
262	132	0.885	1015	0.935	1101	1.131	1344	0.034	0.127	0.046	0.067	599	436	407
313	159	0.937	1178	0.987	1302	1.175	1495	0.033	0.112	0.038	0.056	604	487	455
373	189	1	1400	1.05	1514	1.245	1774	0.032	0.099	0.032	0.047	674	553	516
444	227	1.077	1654	1.127	1815	1.325	2025	0.031	0.089	0.027	0.041	750	630	588
535	273	1.179	2005	1.23	2200	1.43	2438		0.081	0.022	0.035	839	709	630
646	326	1.272	2348	1.328	2586	1.53	2841		0.073	0.019	0.03	937	783	731
777	394	1.4	2709	1.455	3050	1.629	3336	0.03	0.067	0.015	0.026	1048	881	822
1111	562	1.687	3965	1.75	4225	2.05	4638		0.056	0.011	0.018	1303	1098	1025

Type P Single Conductor Power Cable Standards

IEEE 45 (2004), IEEE 1580 (2010), UL 1309 (2011)
Type P Insulation: IEEE 1580, UL 1309 TYPE X110
Type N Sheath: IEEE 1580, UL 1309
Flame Retardant: IEEE 1202 VW-1, IEC 60332-3 CAT. A
Fire Resistant: IEC 60331-1/2/21 (OPTIONAL)
Cold Bend/Impact: CSA 22.2 NO. 03 (-40°C/-35°C)

Type P Single Conductor Power Cable Application

Designed and constructed for the demanding environments of offshore drilling and petroleum facilities located throughout the world.

Type P Single Conductor Power Cable Why Choose Huadong

As a professional Type P Single Conductor Power Cable manufacturer, HuaDong has over 30 years of production experience and 15 years of export experience.Our Type P Single Conductor Power Cable export such as South Africa, Philippines, Indonesia, Malaysia, Singapore, Vietnam, Korea, Mongolia, Yemen, Cambodia, Thailand, Kenya, Tanzania, UAE, Botswana,Nigeria, Panama, Iran etc.High quality service and production are the first choice of many customers.