15/32” (11.79mm) 7-CONDUCTOR 7J46

15/32” (11.79mm) 7-CONDUCTOR 7J46 PROPERTIES

Cable Diameter	0.464” +0.005” - 0.002”	(11.79mm + 0.13mm -0.05mm)
Minimum Sheave Diameter	20”	(51 cm)
Cable Stretch Coeffcient	0.77 ft/Kft/Klbs	(0.87 m/km/5KN)

15/32” (11.79mm) 7-CONDUCTOR 7J46 ELECTRICAL

Maximum Conductor Voltage	1200 VDC
Conductor AWG Rating	20
Minimum Insulation Resistance	1,500 MegΩ/Kft @ 500VDC	(457 MegΩ/Km @ 500VDC)
Armor Electrical Resistance	1.3 Ω/Kft	(4.3 Ω/Km)

15/32” (11.79mm) 7-CONDUCTOR 7J46 MECHANICAL

Cable Breaking Strength Ends Fixed	19,100 lbs	(85.0 KN) Nominal
Maximum Suggested Working Tension	9,550 lbs	(42.5 KN)
Number and Size of Wires
Inner Armor	24 x 0.0390”	(0.991 mm)
Outer Armor	24 x 0.0495”	(1.257 mm)
Average Wire Breaking Strength
Inner Armor	357 lbs	(1.58 KN)
Outer Armor	575 lbs	(2.56 KN)

Cable Type	Core Description								Cable Weight
	Temp Rating °F °C	Plastic Type	Insulation Thickness in mm	Copper Construction in mm	Res. Typical Ω/Kft Ω/Km	Cap. Typical pf/ft pf/m	O.D. Each in mm	Tape Type	in Air	in H2O
									lbs/Kft Kg/Km
7J46RP	300 149	Poly	0.029 0.737	7x0.0128 7x0.325	9.8 32.2	40 131	0.096 2.438	Dacron	321 478	265 395
7J46RXZ	420 216	Camtane ETFE	0.016 0.406 0.013 0.330	7x0.0128 7x0.325	9.8 32.2	40 131	0.070 1.778 0.096 2.438	Nomex	340 507	281 419
7J46RTZ	500 260	FEP ETFE	0.016 0.406 0.013 0.330	7x0.0128 7x0.325	9.8 32.2	39 128	0.070 1.778 0.096 2.438	Nomex	341 507	282 419

The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed.
Core assembly – Conductors are bound with conductive tape and voids are flled with conductive paste and string.
Conductors are “Water Blocked” to reduce water and gas migration. Conductor resistance is measured at 68° F.
The temperature rating assumes a normal gradient for both temperature and weight.
Center conductor construction is 6x0.0142” with a non-conductive center member. The typical resistance is reduced by
approximately 5 to 10% and the capacitance is increased by approximately 5 to 10% in comparison to the outer conductors.
All values shown are nominal or typical values.