1/10” (2.56 mm) MONOCONDUCTOR 1N10

1/10” (2.56 mm) MONOCONDUCTOR 1N10 PROPERTIES

Cable Diameter	0.101” +0.004” -0.002”	(2.56mm + 0.10mm -0.05mm)
Minimum Sheave Diameter	6”	(15 cm)
Cable Stretch Coeffcient	13.1 ft/Kft/Klbs	(14.72 m/Km/5KN)

 

1/10” (2.56 mm) MONOCONDUCTOR 1N10 ELECTRICAL

Maximum Conductor Voltage	300 VDC
Conductor AWG Rating	24
Minimum Insulation Resistance	1,500 MegaΩ/Kft @ 500VDC	(457 MegaΩ/Km @ 500VDC)
Armor Electrical Resistance	22.0 Ω/Kft	(72.2 Ω/Km)

 

1/10” (2.56 mm) MONOCONDUCTOR 1N10 MECHANICAL

Cable Breaking Strength Ends Fixed	1,000 lbs	(4.4 KN) Nominal
Maximum Suggested Working Tension	500 lbs	(2.2 KN)
Number and Size of Wires
Inner Armor	12 x 0.0140”	(0.356 mm)
Outer Armor	18 x 0.0140”	(0.356 mm)
Average Wire Breaking Strength
Inner Armor	42 lbs	(0.19 KN)
Outer Armor	42 lbs	(0.19 KN)

Cable Type	Core Description							Cable Weight
1N10RP	Temp Rating °F °C	Plastic Type	Insulation Thickness in mm	Copper Construction in mm	Res Typical Ω/Kft Ω/Km	Cap. Typical pf/ft pf/m	O.D. Each in mm	in Air	in H2O
								lbs/Kft Kg/Km
	300 149	Poly	0.012 0.305	7x0.0085 7x0.216	21.0 69.0	51 167	0.049 1.244	19 28	15 23

The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for
protection during shipping and storing. Wires are preformed.
Core assembly – Copper strand consists of six wires around one center wire. Conductor resistance is measured at 68° F.
Voids in the copper strand are flled with a water-blocking agent to reduce water and gas migration.
SUPERSEAL, a special pressure seal agent, is applied between armor layers.
The temperature rating assumes a normal gradient for both temperature and weight.
All values shown are nominal or typical values.