7/32” (5.69 mm) MONOCONDUCTOR 1N22

7/32” (5.69 mm) MONOCONDUCTOR 1N22 PROPERTIES

Cable Diameter	0.224” +0.005” - 0.002”	(5.69mm + 0.13mm -0.05mm)
Minimum Sheave Diameter	13”	(33 cm)
Cable Stretch Coeffcient	2.5 ft/Kft/Klbs	(2.81 m/Km/5KN)

7/32” (5.69 mm) MONOCONDUCTOR 1N22 ELECTRICAL

Maximum Conductor Voltage	1,200 VDC
Conductor AWG Rating	16
Minimum Insulation Resistance	1,500 Mega Ω /Kft @ 500VDC	(457 Mega Ω /Km @ 500VDC)
Armor Electrical Resistance	4.4 Ω /Kft	(14.4 Ω /Km)

7/32” (5.69 mm) MONOCONDUCTOR 1N22 MECHANICAL

Cable Breaking Strength Ends Fixed	5,600 lbs	(24.9 KN) Nominal
Maximum Suggested Working Tension	2,800 lbs	(12.5 KN)
Number and Size of Wires:
Inner Armor	12 x 0.0310”	(0.787 mm)
Outer Armor	18 x 0.0310”	(0.787 mm)
Average Wire Breaking Strength
Inner Armor	215 lbs	(0.96 KN)
Outer Armor	215 lbs	(0.96 KN)

Cable Type	Core Description							Cable Weight
	Temp Rating °F °C	Plastic Type	Insulation Thickness in mm	Copper Construction in mm	Res Typical Ω/Kft Ω/Km	Cap. Typical pf/ft pf/m	O.D. Each in mm	in Air	in H2O
								lbs/Kft Kg/Km
1N22PP	300 149	Poly	0.0245 0.622	19x0.0119 19x0.302	4.1 13.5	58 190	0.108 2.743	93 139	77 115
1N22PXZ	420 216	Camtane ETFE	0.0130 0.330 0.0115 0.292	19x0.0119 19x0.302	4.1 13.5	59 194	0.085 2.159 0.108 2.743	95 141	80 119
1N22PTZ	500 260	FEP ETFE	0.0130 0.330 0.0115 0.292	19x0.0119 19x0.302	4.1 13.5	58 190	0.085 2.159 0.108 2.743	96 143	80 119
1N22WG	600 316	TE	0.0245 0.622	19x0.0119 19x0.302	4.7 15.4	58 190	0.108 2.743	97 144	80 119

The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion
compound for protection during shipping and storing. Wires are preformed.
The nickel coated copper wires are made of ASTMB355 Class 10 and they are used to increase corrosion protection.
Core assembly – Copper strand consists of a total of nineteen wires. Conductor resistance is measured at 68° F.
Voids in the copper strand are flled with a water-blocking agent to reduce water and gas migration.
SUPERSEAL, a special pressure seal agent, is applied between armor layers.
The temperature rating assumes a normal gradient for both temperature and weight.
All values shown are nominal or typical values